How to weave a poppy from beads. Bead poppy: weaving patterns and a step-by-step master class

Many people associate a bouquet of poppies with summer and sunshine. And it is not necessary that this bouquet was real. You can make poppies from beads, and they will be very similar to real flowers. The bouquet can be placed at home as a decorative element or given to someone for a holiday.

Although it is quite easy to weave a poppy from beads, it is better for beginners to choose an easier master class. For weaving, you need to prepare the following materials:

beads in three colors (red, black, green);
wire for weaving (diameter 0.3 mm);
thick wire for the frame;
green threads, PVA glue.

Beads need to be taken No. 10 and 12. At the same time, it can be Chinese - not very even. This is not suitable, for example, for mosaic technique or embroidery, but in such colors this flaw will be almost invisible.

A poppy bud consists of a poppy box of petals in the amount of 4 pcs and stamens. Naturally, red beads are best for the petals, but options are also possible. Threads are required for winding the flower stem.

weaving petals

They usually start with weaving beaded petals for a poppy, the scheme is suitable even for beginners who have just decided to master beading. They operate as follows:

The twisted wire is passed between the loops located in the middle. The petal is slightly pressed inward to get the desired shape, the edges are slightly turned inside out. One flower requires four identical petals.

Creation of stamens

Stamens will need two types. There is nothing complicated here either:

It remains to take the end of the wire and push it through the middle of the product down. It turned out to be a nice poppy box.

The second type of stamens is woven from black beads. Needle weaving is already used here. They take a wire 110 cm long and collect 14 beads. They are located near the edge, one end of the wire is passed through 13 beads (the direction is reversed). Get a needle. As a result, 18 needles are woven.

poppy leaf

Weaving the leaves is also very easy. To do this, take a wire about 80 cm long. Step by step creation looks like this:

The number of sheets depends on the idea of the needlewoman. You can do one for one flower or make three out of a piece to make the bouquet more colorful and bright. In the leaves, you can arbitrarily combine green and yellow beads.

flower assembly process

When all the components of the flower are ready, the most interesting thing remains - to put them together. It is very simple, and even a beginner to master beading can handle it. Step by step process:

To create a rod, they take a thick wire and wind the previously created poppy box to it.
Below, stamens are wound in a circle.
Then they begin to wind 2 petals, followed by the remaining 2. Screw the elements crosswise.
A wire stem is wrapped with threads, then a leaf or leaves are wound, if more than one has been created.

After that, the poppy assembly process is considered complete. If more poppies are created for the bouquet, then they are collected in a similar way, and then put in a beautiful vase.

Mosaic weaving

Beading is distinguished by its versatility, even ordinary poppies can be created using different techniques. You can create bundles of stems, embroider poppies on a black background, or use a mosaic technique. Mosaic weaving is somewhat more complicated and it is better to first master it on simpler products.

To create a poppy, you need beads of three colors. They choose any, but they invariably take black for the stamens and the middle. A poppy petal is woven like a leaf from 2 parts - first one half, then the second. Start with the following:

The second half of the leaf is woven in the same way. Then you need to create a third petal and sew them all together using the last three beads on each petal. Stamens are made in random order, sewing long black threads into the middle of the flower. The stem is created in the same way as in the case of the first option. Then you can stop at one flower or create a whole bouquet.

Weaving beaded poppies is interesting and exciting. The process is equally addictive for adults and children. Based on these instructions, you can weave other flowers, changing the size of the petals and choosing beads of other colors. Here one is limited only by one's imagination. Having mastered simple techniques, you can turn beading into an exciting hobby.

Poppies can also be embroidered with beads. You can find different patterns for quick and easy weaving of bright poppies, materials and an embroidery master class. It is not necessary to follow exactly the scheme, you can be creative with bead embroidery.

Triptych of poppies on a black background:

Here are some patterns that are suitable for weaving poppies of different sizes from beads:

Schemes of weaving a petal.

The first version of weaving poppies from beads with patterns

In this master class on creating poppies, we will need:

Green, black, red beads.
Galvanized wire 60 numbers.
Rigid rod.
Semi-rigid rod.
The thread is silk.
Vinyl glue.
Wire cutters.
Round nose pliers.

We create four rounded petals on the main axis (1.5 cm) and make seven pairs of arcs around it with the help of beads. We try to make the petals have a round configuration as in the photo.

Then we make several leaves on the main axis (approximately two centimeters). We create four pairs of arcs near the other axis using beads. You need to create a scalloped edge in the last row, like a genuine poppy.

Now let's create a button. First, we create a petal by the method of stringing with arcs, bending around the axis three times (two centimeters).

We make the middle of six loops of the same number of beads each. Let's unite them by rounding the beaded cord.

To create stamens, we make large loops of 2.5 centimeters.

Collecting poppies. We fasten two leaves to a semi-rigid rod. We attach a bud to the second rod, immediately attach a core of six loops to the end of the wire with leaves, then stamens. Then we wrap it with a silk thread, fasten four leaves. Retreating 4 centimeters from the flower, we fasten the branch and wrap it until the end of the stem.

Our poppy is ready!

Master class on creating wild flowers with your own hands

Poppies are wild flowers in Central Asia. This type of poppy does not form a box, during their flowering the valley becomes bright red and in some places bright yellow, because there poppies are red, pink and yellow - this is an unforgettable sight. The beginning of flowering of such poppies falls on May.

We will learn how to make a beaded poppy.

We will need red beads with different shades for each flower No. 10 (50 gr.), Greenish-gray transparent beads No. 10 (40 gr.), Faceted black beads No. 12 (2 gr.) And wire.

The poppy flower has 4 or 5 petals and 2 or 3 leaves, 5 stamens. In nature, there are many shades of poppy. So we can create a flower of different shades: from red to yellow.

We begin to weave poppy petals with a circular weave of red beads, on a sixty-meter wire. Let's take the following diagram:

Five beads, nine rows.
Let's create four or five rounded petals for each flower.
To weave stamens, take a wire 45 centimeters long and collect 12-15 faceted black beads on its center. We create a loop from beads, twist the ends of the wire twice. We make three more loops at each end. In total, we should get 5 loops. Two or three times we twist the ends of the wire under the stamens.
On a wire 60-80 centimeters long, we create a sheet with two pairs of cloves. We use the technique of parallel weaving according to the guiding scheme:

We create poppy leaves from gray-green beads. Each flower may have a different number of teeth. Each product should have several different leaves, since in nature there are no absolutely identical objects.
From the details we weave a poppy. For this, we place five petals evenly around the center of the stamens, twist the ends of the wire under the flower 5-6 centimeters. Then we add the first sheet and twist the wire two or three more times. Then we attach the next second sheet, we twist the wire as well as the third sheet and weave it to the end. We create only two sheets for individual flowers.
In the same way, we collect and weave the rest of the poppies.

As a result, this is what we got:

Learning the third way to assemble bright flowers into a bouquet

Poppies are very beautiful, their fiery and bright flowers catch the eye. But a poppy cannot stand in a vase forever, the red petals will quickly wither and fall off. If you create a poppy from a material such as beads, then this beauty will be with you for a long time. Even not very experienced masters can cope with this. You just need a little patience, as this work is laborious and painstaking. You should get such a stylish bouquet:

For this tutorial we will need:

Beads No. 10 of different colors (light green, black, green, red),

Wire of different thickness (1mm, 0.6mm, 0.3mm),

Thread or floral tape.

Let's start with the petals. Weave French beads with red beads, three arcs on each side and place two unfinished arcs a couple of beads below the previous one.

Weave only six petals for the first product.

When the petals are created, we start weaving black stamens. Here we use needle technique.

The composition of each "needle" contains nine beads. They need to make nine pieces. Then we knit them.

In order to create a poppy box, you need light green beads. It is created in loop technique. We string thirteen beads on the wire and weave a loop out of them. Next, we make loops on the free ends of the wire. You need six loops per wire. Then we close the box using black beads.

Let's start weaving leaves. They need to be stitched so that they hold well and are strong. 0.1 wire is suitable for this. This wire will not be noticeable and the leaf will look elegant. You decide how many leaves you need.

We have petals, stamens, poppy box, leaves ready. Now let's collect everything to create our flower.

We connect all parts of the product with a strong fishing line.

Our flower is ready! If you have time and desire, then you can make a bouquet of such poppies.

An interesting lesson on creating a purple poppy from beads

This product can be made on a thread with a needle, and not on a fishing line. It's much easier than using string. This requires a special beading needle. The beads fit well and the product turns out to be more elegant, you can change the shape of the product in the right place, increase it. We will need:

lilac beads No. 10;
pale yellow beads No. 10;
beads light green No. 5 3 pieces;
beaded needle with thread;
copper wire 0.2 mm;
copper wire 0.8 mm;
green wire 0.4 mm;
pale green floss thread;
PVA glue.

This product used a mosaic weaving technique. It is necessary to take a thread one meter long. We start weaving with six yellow beads and five purple ones. We start work from the middle, after the end of one side, we proceed to the second. In this case, ordinary Chinese beads are used.

The main flower should consist of 5 petals, absolutely identical in size. Along the edge, each of the petals is intertwined with beads so that the edge is smooth. First you need to make a knot, and then go through five beads and cut the thread.

We sew two at once, and then the lagging behind three petals after we created the petals. Let's assemble the product and insert both parts into each other. Carefully sew together at the bottoms.

Everything is easier with buds! The half-opened bud contains the regular petals that you previously wove, folded into a pipe and sewn with thread so that it is not visible. To create a bud, we need to make small leaves using green wire and beads. You need to pick up one bead, move it to the middle of the wire, pick up two beads and go through them with two ends crosswise. Then we collect 3, 4, 6, 4 beads and cross the wire after each set of beads. The sheet is ready. Now let's create the second one.

The green bud contains three leaves, which we weave in parallel, picking up beads in the following order: 3, 4, 5, 6, 7, 5, 4, 3, 2. Then mix them, creating a bud.

Wire leg

Cut off 35 centimeters 0.8 mm. We string a large bead of the fifth number on it, move it to the center of the wire, and tie both ends of the wire. We need three of these legs. Then we put on it two buds and a flower.

Green leaf and stamens

It is necessary to drastically change the number of beads so that there are teeth on the leaf. You can dial in the following order: 1, 2, 3, 4, 6, 7, 6, 5, 7, 5, 3, 1.

We put the legs in both buds. A large bead should secure them. We fix the green leaves in the necessary places and proceed to wrap the legs with floss threads.

Now we need to create the center of the main flower. This can be done with yellow beaded stamens and a fairly thin 0.2 mm wire. Put on one bead and twist the wire. Repeat these steps until you have the desired number of stamens about three centimeters long. Take the leg and attach all the stamens with a large light green bead.

We put the prepared leg together with the stamens in the prepared flower. In order for it to hold on tighter, it can be supported with small greenish leaves made in the following order: 1, 2, 3, 4, 5, 6, 8, 6, 5, 3, 2. We will attach both of these leaves to the leg and wrap with green floss threads. Fix with PVA glue. The lower leaves of our poppy were created as follows: 1, 2, 3, 4, 6, 8, 6, 4, 6, 8, 6, 4, 3, 2 - with both teeth on the edges. And again we wind these leaves to the legs and wrap them with floss threads.

We have made three flowers. We will collect them in a bouquet and compose a composition. It's good to take an example from real poppies, wrapping the buds in the way that they tend to. In this case, the beaded flowers look more real.

I wish you good luck in your work!

Detailed video for beginners

Beading is quite an exciting activity. You can weave anything from beads - a flower, a keychain, a toy, and even a whole bag. Many beautiful flowers are obtained by simple interlacing of a thread with beads. The beaded poppy looks very realistic.

Usually this flower is made using mosaic weaving. And each petal separately. After all the petals are woven, they must be collected into one flower. The scheme of poppies from beads will be presented below. And also consider the step-by-step implementation of this flower.

Tools and materials

To make a beaded poppy, you will need some materials and tools. First of all, you need beads - two colors for the petal and one for the leaves. For petals, red and black colors are most often used, but other options can be found, such as purple poppy and even blue.

Well, for the leaves, of course, green. The difference is only in shades, which can be darker or lighter. Here already to your taste. Also, weaving poppies from beads, the schemes of which will be presented below, requires a fishing line or thread tucked into a beading needle. To make the stems, a wire is used, which is wrapped with green floss threads. In addition to all of the above, do not forget scissors, glue, wire cutters. Also, prepare your workspace. Take care of the lighting, because beading still has a certain load on the visual organ. Cover the surface you will be working on with a soft, light-colored cloth. It is best if it is monophonic. Beads are clearly visible on such a fabric, and it also does not crumble during operation.

Which beads to choose

There are just a huge number of bead manufacturers, but all their goods are divided into only three categories. The first includes beads produced in Taiwan, China and in the vastness of our Motherland. Its quality leaves much to be desired. It is rough, brittle and has an uneven edge. But it is the cheapest, which means it is ideal for those who take beads in their hands for the first time. The second category is Czech beads. Its quality is much higher, and the price has not yet reached sky-high heights. Weaving a poppy from beads in a mosaic technique is best done with this particular version of the material. If you use beads of the first category, you are unlikely to be able to achieve the desired petal shape. But, despite all its advantages, Czech beads still have a certain percentage of marriage. However, compared to the previous one, it is very small. And finally, the beads of the third category are Japanese. This is the highest quality and most durable beads in the world. It is also the most expensive, which certainly affects the cost of products from it. Most often used to create jewelry. In Japanese beads, you will not find curved edges and rough surfaces. Even the hole for the needle in it is quite large.

Master class of beaded poppies (main flower)

To create a poppy, we use red and black beads. We start work by picking up five red and six black beads on a fairly long thread (1 meter). This will be the center of the petal. From it we weave in one direction and then in the other direction, reducing the number of black beads in vertical rows from the center to the edges. Although you can weave from the bottom up, as shown in the diagram.

The main poppy flower consists of five petals. They all have exactly the same shape and size. To make the edge of the petal look beautiful and have smooth curves, braid it with additional beads in a circle. To make the threaded thread look neat and not unravel, make a knot, and then pull it through the next five or six beads. Now just cut off the excess.

flower assembly

Beaded poppies, the photos of which are presented in this article, consist mainly of two rows.

The bottom row is represented by three petals sewn together, and the top row consists of two petals that are connected in two places. When you have collected both rows, insert them one into the other and connect the bottom edges, sewing them neatly at the bottoms.

How to make the center of a flower

The middle of poppies is performed in various ways. Let's consider the simplest of them. Take a large green bead, pull the wire through it and twist the ends. Now take a very thin wire and cut as many pieces as you planned to put in your beaded poppy. Putting a light yellow or light green bead on each segment, twist the free ends of the wire together. Collect the central bead and all the stamens around it into one “bouquet” and insert it into the center of the poppy.

Weaving buds

To imitate a half-opened poppy bud, you need to weave a petal and roll it into a tube, securing it with stitches. On the sides of such a bud are small green leaves, which are made by parallel weaving on a wire. For one such leaflet, take a piece of wire and first string one bead on it, move it to the center, string two beads and pass through them with both ends of the wire. After that, put on three, four, six and four beads. Thread each row of wire as described above. For a green bud that has not yet opened, you need to take three leaves. Each of them is woven in a parallel way. Rows are drawn in the following sequence: three, four, five, six, seven, five, four, three and two beads. All these three leaves need to be sewn together, forming a bud.

How to make leaves and flower stem

Poppy leaves can be woven in several ways. The simplest of them is parallel weaving on wire. They are created in the same way as small bud leaves, but larger. You can, just like petals, weave with mosaic weaving from the middle of the sheet. Then they can be made more interesting, add a jagged edge. The diagram shows another version of the sheet with a hole in the middle.

First, everything is done with mosaic weaving, and then the edges are connected to each other. If your flower should have a stem, then you can make it from wire wrapped in green floss threads. When wrapping the wire with threads, at the end coat the edge of the thread with glue to fix it. To fix the buds on the stem, you first need to put on a large bead on the piece of wire that is supposed to be the stem, place it in the middle, and wind the flower stem from the free edges. Then put a bud on the stem, which will be fixed thanks to the bead.

Applications

Beaded poppy has a huge number of applications, primarily in the creation of various costume jewelry. Poppies can decorate not only a necklace or bracelet, but even earrings and rings.

Poppies in the hair look very beautiful. They miraculously adorn all kinds of elastic bands, hairpins and headbands. You can also make a bouquet of stemmed poppies and put them in a vase, or attach the flowers to your bag or clothing as a brooch.

We looked at how to weave a wonderful poppy flower from beads. If you choose high-quality beads and follow the instructions exactly, you will be amazed at how realistic it looks. With the help of such a flower, you can easily decorate any outfit or accessory and enliven your image. And also have a good time creating it with your own hands.

Poppies are incredibly bright and beautiful flowers. It is impossible to see them and remain indifferent. Fiery flowers are eye-catching, but a bunch of poppies won't last forever in your home. The scarlet petals will fall, the leaves will wither. But if you weave this flower from beads, then this incredible beauty will remain with you forever. We offer you a master class, you will find photos with step-by-step instructions below in the article.

Poppies from beads: step by step MK

Today we will tell and show you how to weave a poppy from beads: the master class is quite detailed and even not the most experienced craftswomen will be able to cope with the work. You just need to be patient, because the work is painstaking and very laborious, as a result you can make an amazing bouquet of poppies, as in the photo:

We will need the following materials:

Beads No. 10 (red, green, black, light green);
Wire of different thickness: 0.3mm., 0.6mm., 1mm.;
Floral ribbon or thread (green).

Instructions for weaving poppies:

1) We will start work with flower petals. With French weaving, we weave with red beads three arcs on each side and two unfinished arcs (they need to be placed a couple of beads below the previous one).

We need to weave only 6 petals for the 1st flower.

2) After the petals are woven, weave black stamens. Needle technique is used for their weaving.

Each "needle" should consist of 9 beads, and such "needles" need 9 pieces. Then they need to be twisted.

3) What is a poppy without a poppy box? To weave such a box, we need light green beads. It is woven in loop technique. We string 13 beads on the wire and twist them into a loop, then weave loops on the free ends of the wire. Only 6 loops for 1 box. Then this box must be closed with black beads (see photo).

4) Next weave the leaves. In order for them to be strong and hold well, they need to be stitched. It is best to do this with 0.1 wire (it will not be visible and the leaf will look more elegant. The number of leaves is up to you.

5) So, we have woven the flower petals, stamens, poppy box and leaves - now we need to put it all together to make our poppy flower.

With the help of a thick fishing line, you need to combine all the parts of the needlework in turn.

Our poppy is ready! If you have the desire and time, you can weave a whole bouquet, because now you know how to make poppy seeds and beads. We also invite you to watch a video with a master class on weaving these beautiful flowers.

Beaded jewelry with poppies

Poppies look great as decoration motifs.

For example, such a bright bracelet:

Or this incredibly stylish tourniquet:

To weave a tourniquet of "Poppies" beads, we need:

Beads No. 10 (white, red, black, yellow);
White bobbin threads No. 10;
Hook 0.7 or 1;
Beaded needle;
Accessories for jewelry.

You need to weave a tourniquet according to this scheme:

The main thing is not to get lost when lowering the beads, otherwise the drawing will not work. After all the beads are put on, the length of the thread will be about 5 meters.

And then the knitting of the harness begins:

It is necessary to leave a free tip of about 30 cm, a lock will be attached to it. Then, 15 air loops are crocheted, which must be wrapped in a ring, using a column. All the following rows are knitted with beads with a single crochet. She is a loop - one bead.

And so on until the very end of the tourniquet.

After that, we need to leave another free thread of about 30 cm. Now we fasten the locks.

The harness is ready!

Embroidery of poppies with beads

Poppies can not only be woven from beads, they can, of course, also be embroidered with beads. Now you can find almost any scheme, and manufacturers, knowing about the love of needlewomen for these real fire-flowers, saturate the market with a variety of materials.

In order for you to get beadwork: poppies MK is not required. It is enough just to follow the scheme, and you will be able to “draw” real masterpieces with beads:

Or, for example, here is such an incredibly beautiful triptych "Poppies":

Good luck with your beading!

Video on the topic of the article