How to make cold porcelain flowers with your own hands. Crafts - flowers made of cold porcelain Cold porcelain sculpting garden flowers

Evgenia Smirnova

To send light into the depths of the human heart - this is the purpose of the artist

Content

Creative activities involve working with various types of materials. When sculpting figures, for example, in addition to clay, you can use cold porcelain, which is much easier to deal with. This plastic composition is more delicate, which guarantees the preservation of a feeling of weightlessness in finished crafts. Flowers and small details that require careful design are often made from cold porcelain.

What is cold porcelain

The main ingredients, without which it is difficult to imagine preparing this type of porcelain, have long been considered glycerin, corn starch, PVA glue and oil. Modern recipes are undergoing changes in composition. A homogeneous composition for modeling was invented at the beginning of the last century in distant Argentina. Initially it was created for the production of small figurines with many details. Art modeling from cold porcelain is popular among adults and children due to the extreme ease of working with it.

How to make cold porcelain with your own hands

The convenience of soft, pliable mixtures for creativity lies in the ability to prepare them at home. You can make cold porcelain with your own hands without much effort or money. The step-by-step instructions vary, but mostly contain the same steps and ingredients. A recipe for cold porcelain at home may contain a step such as cooking, or it may do without it. There are methods of cooking even in the microwave, but they are more labor-intensive.

Training master class for beginners

It will take time to learn how to sculpt beautiful figures, but even beginners who have never sculpted crafts before can easily prepare cold porcelain. The mass is prepared from the following components:

corn starch;
baking soda;
water;
vegetable oil.

A more common cooking method looks like this:

Take equal amounts of soda and starch and move them around in a saucepan.
Gradually add water to the dry ingredients. The proportions should be 2:1.
Pour in a little oil.
Place the mixture over low heat and stir continuously until it thickens. The porcelain should have a dense consistency.
After turning off the stove, cover the saucepan with porcelain, previously moistened with a towel.
Once the temperature has been reached, knead the material with your hands to ensure uniformity.

Cold porcelain recipe without cooking

To cook or not to cook? That is the question! Craftswomen who prepare cold porcelain with their own hands are divided into two categories: the first are for cooking, and the second are against it. There are practically no differences in consistency and properties. Cold porcelain without cooking is just as flexible and easy to make. Among the necessary ingredients are the following:

starch - 2 tbsp. l.;
Vaseline – 1 tbsp. l.;
baking soda;
PVA glue.

The algorithm is as follows:

Take a dry bowl and pour starch into it. You can take corn or potato.
After slightly melting the Vaseline in a water bath, add it to the dry ingredient.
Sprinkle a little soda. Knead the future porcelain thoroughly to avoid the formation of lumps.
Next, add glue a teaspoon at a time to make the composition soft.
Before work, lubricate the material that has been pressed until smooth with Vaseline.

How to cook with potato starch on the stove

Potato starch is a more familiar ingredient for culinary experts than its corn counterpart. It can be found in almost every home, so making porcelain from it may be easier in terms of availability. If you plan to create light elements, such as rose petals, it is better to avoid potato starch, since the peculiarity of the product is a grayish color. A simple classic method involves cooking on the stove. List of components:

potato starch – 180 g;
glue – 180 ml;
lemon juice – 1 tbsp. l.;
glycerin – 1 tbsp. l.;
Vaseline – 1 tbsp. l.

The steps are as follows:

Combine all ingredients one by one in a small saucepan. The mass will turn out liquid; it must be mixed to a uniform consistency before cooking through heat treatment.
The container with the solution is placed on the lowest heat and the composition is stirred. Readiness is determined by the mass sticking to the spoon.
The cooled material is kneaded with creamed hands for at least 5 minutes.

How to color the resulting mass

Cold porcelain made at home requires staining. To add color to the mass, food coloring, pigments and acrylic paints are used. The first two coloring substances are used when cooking porcelain, adding them to the composition along with the main components. In this case, you will need to prepare several balls of porcelain mass to give each one a different color. Acrylic paints are used when the product is dry and just needs to be painted. This option is a little more convenient, more practical and takes less time.

How to make crafts

Cold porcelain is a material that is often mentioned in master classes on making flowers. You can mold them without using special tools, with just your hands, but the best result can be achieved with the help of molds. Apart from these, delicate flowers are made using plastic spoons. The plastic mass is laid and rolled out along the recess of the spoon, and then several of these elements are assembled into a flower, for example, a tulip. You can use different tools; this creative process is limited only by imagination.

How to properly dry the finished product

Drying the finished craft is an important stage in all work with cold porcelain. There are cases when, when drying the finished product, the material cracks, leaving unsightly grooves. How to properly dry a craft? This is done at room temperature, at least for 24 hours. It is very important to turn the product over if it is lying on one side and not in a vertical position. To speed up the process, some needlewomen slightly heat the oven, and then, turning it off, place the craft there for a short time.

Recently, it has become popular among florists and handmade lovers to make flowers from cold porcelain. The buds impress with their realism and amaze with their beauty. To create a fragile and translucent masterpiece, you do not need professional skill at all, only plastic material and invention. Today we will talk about how to make flowers from cold porcelain with your own hands at home, and present simple and understandable modeling workshops with photos.

Cold porcelain crocuses

Materials for making crocuses:

a set of plastic spoons;
cold porcelain (we have already written how to make cold porcelain at home);
food colorings;
cookie cutters;
cutting board;
coil of wire;
knife;
a roll of green electrical tape;
rolling pin;
plastic blades of grass or thick green cardboard;
basket or wrapper for a bouquet.

A pretty bouquet of flowers from cold porcelain is made as follows:

Roll out the HF according to the type of dough. Cut out the petals with a special iron droplet-shaped cookie cutter.
If you press the petal onto any grooved surface, you will get a beautiful pattern on the surface.
To make the petals come out curved, place each one in a plastic spoon, pressing firmly.
Wrap the wire with light green electrical tape to create stems.
Next, use yellow or orange HF pieces. Roll them out and cut into small triangles.
Cut the base of each triangle finely, roll them into tubes, and this way you will get cute little pistils.
Make stamens from the same yellow material. Treat each one with PVA glue, and you can dip it in corn grits for beauty to make it look like pollen.
Attach 3 pistils and 3 stamens to the stem.
Next, 2 rows of 6 petals are attached to the base.
Cover the stem with green HF, and hang the flowers with their heads down so that they do not lose their appearance.
Place the dried flowers in a basket, alternating them with plastic blades of grass. Or you can simply tie them with ribbon.

Important! It is not necessary to paint the material; you can simply decorate the finished product with oil paints.

Bright tulips of their cold porcelain

Required tools and materials:

gouache;
scissors;
glue;
toothpicks;
baby cream;
rolling pin;
brushes;
wire;

Here is a simple step-by-step modeling for beginners. It is simple and does not require large material and energy costs.

Modeling flowers from cold porcelain consists of the following steps:

Treat your tools, table surface and hands with cream.
To make the center of a tulip, you need to paint the material in a pale light green shade.
The pistil of a tulip consists of 3 divisions, and the number of stamens is 6.
Bend the tip of the wire into a loop, dip it in glue and attach a pestle to its end. Make three grooves in it with a toothpick, thus dividing it into three equal parts.
Make 6 more cuts in the middle so that the legs of the stamens are formed.
Let's move on to making the stigma of the pistil. Attach it to the top and use a toothpick to shape it into the desired shape.
Mix yellow and red gouache in a drop of water. You will get an orange tone, color the anthers.
Make the flower itself pink.
Roll out the blanks into petals, helping yourself with your hands or the rounded tip of a rolling pin.
Use a toothpick to draw a petal pattern. Leave to dry for about 3-4 hours.
After the petals have almost dried and taken the desired shape, you need to attach the tip of the petal to the Kinder Surprise box and lightly wrap it with a wool thread.
Assemble the bud by strengthening 2 rows of 3 petals.
Place light green HF tape between the rows and cover everything with glue.
Leave the buds to dry for about a day, heads down.
After drying, continue working.
Color the material for the leaves and stems.
Cover the leaves and stems and leave for another 12 hours.
Roll out the HF sheet and cut out the leaves using scissors. Make the edges thin by rolling them out with a regular rolling pin.
Leave to dry for a day, making a curve in the center of each.
Get to tinting. Mix white and red gouache with water.
Tint the entire product with this color.

Apply a light green tone to the bases of the petals so that there are no sharp transitions.

Attach the leaf to the stem, and the bright tulip is ready.

Delicate rose made of cold porcelain

We bring to your attention the mega-popular sculpting of a rose from cold porcelain with your own hands. Prepare:

modeling mass;
sponge for washing dishes;
toothpicks.

Here is a step-by-step master class for beginners:

Twist a small ball of HF and make a drop shape out of it.
Dip the tip of a toothpick into the glue and place the resulting droplet on it with the wide tip down. The base of the rose came out. To make it easier to work with, insert a toothpick into the sponge.
Make a little bun again and drop a drop out of it.
Place a drop on your palm and flatten it with your index finger. You will get a petal, the edges of which should be as thin as possible.
Lubricate the base of the petal for strength, and apply it to the core, as if “hugging” it with a petal.
Repeat making the petals, and lay the petals slightly overlapping.

If you make a lot of these blanks, you can easily make a bright, fancy, round-shaped tree on a leg.

Headband with orchids

For an original hair decoration, you will need:

oil paints of different colors (white, yellow, green);
red acrylic paint;
green and red pastel;
wire for floral work;
PVA glue;
brushes, knife, dumbel, scissors;
small orchid mold;
HF and the rim itself.

The work is done this way:

Cut a couple of 6 cm pieces of wire. Bend one end of the wire into a loop.
Mix a small lump of HF with egg white paint and form into a ball with a diameter of about 1 cm.
Dip the loop in PVA and put a white lump on it.
Do the same manipulations with the second wire, perhaps with a slightly smaller diameter.
Using a knife, scrape the green pastel crayon. Dip a dry brush into the powder and paint the bases of the buds with it while they are still damp, and the tops with red.
Mix a small lump of HF with green oil dye. Place the colored dough onto the wire with the bud, having previously coated it with glue. Gently stretch the green mass around the entire wire.
Leave the lower tip (1 cm) of the wire “bare”. Roll the wire through the honey with your fingers so that no tubercles remain. Repeat with the second piece.
Take a ball of dough about 2.5 cm in diameter. Mix it with a drop of red and white oil paint to create a delicate pink tint. Tear off a piece from it and form an elongated petal about 1.5 cm high. Using a mold, give the leaf the texture of an orchid.
Place the workpiece on your palm and press it on top with a dowel so that it bends slightly inward. You need 3 such leaves.
Place them in a flower pattern and coat the center with glue.
Glue the top 2 petals. They are rounded and voluminous.
Take a piece of HF and mix it with red oil paint to create a rich shade. Roll out into a thin pancake and cut out the core for the orchid with scissors.
Place it on your hand, treat it with a dowel, and bend the sharp edges inward.
Glue the hearts to the center of the flowers.
Place the pieces one on top of the other, weaving the ends together.
Wrap the green mass around the “bouquet” to the rim, after applying glue to it.
Apply red acrylic to the sharp tips of the orchid cores and draw small red dots on the petals.
Leave to dry for a day, and a beautiful decoration is at your service.

What kind of crafts do you make from cold porcelain? Share with readers in the comments.

Video: Modeling flowers from cold porcelain for beginners

“Cold porcelain” is a special mixture of cornstarch, glue, oil and glycerin that is used for artistic sculpting.

“Cold porcelain” was invented in Argentina at the beginning of the last century.

At the moment, “cold porcelain” is perhaps the cheapest, very convenient and completely harmless material for modeling.

It is convenient to make small parts from it, it has a smooth, uniform texture, it is incredibly flexible and easy to use.

Figures and products from “cold porcelain” can be made by both children and adults.

Unlike plasticine, “cold porcelain” becomes hard when it hardens, which is a definite plus.

“Cold porcelain” is also convenient because it is easy to make at home. There are several different ways to make this wonderful material. Here's the most common one.

Mix cornstarch, water and baking soda in equal proportions.

Add some vegetable oil. Cook the resulting mass over medium heat until very thick, remembering to stir it constantly.

Then remove the mixture from the pan and cover with a damp towel for a few minutes.

As soon as the mass has cooled to the temperature where you can pick it up without getting burned, immediately begin mixing it with your hands again.

When the mass turns into a plastic ball, you can begin to get creative.

By the way, if you need colored material, you can add food coloring during cooking. Or you can paint the products with acrylic paints after they are completely ready. Well, to prevent the material from sticking to your hands, lubricate them with any moisturizer before work.

You can make anything you want from “cold porcelain”; this material gives a lot of scope for imagination. Use in your work not only plastic mass, but also various accessories: beads, threads, shells, seed beads, pieces of fabric and any other interesting things.

And for those who will be modeling not for the first time, here is another, more complex recipe for making “cold porcelain”.

Mix three-quarters cup of PVA glue, one cup of cornstarch, half a cup of water, one teaspoon of glycerin and one teaspoon of cream in a small saucepan.

You can use any cream; I use an inexpensive face cream to prepare a plastic mass.

Thanks to the glycerin and cream included in the composition, the “cold porcelain” made according to this recipe has a very smooth, pleasant texture.

Finished products made from “cold porcelain” will take several days to dry. If after work you have some of the modeling mass left, you do not need to throw it away.

Do you do handicrafts and still haven’t tried making flower arrangements using the cold porcelain technique? It's time to fix it!

To prepare cold porcelain you need:
- 50 grams of starch;
- 50 grams of soda;
- 50 grams of water;
- any dye.

To decorate the composition you will need:
- organza;
- silicone gun and glue;
- toothpicks (about 20-25 pieces);
- thin wire 1 m;
- Styrofoam;
- a pot or other ceramic vessel;
- varnish in a can;
- beads.

So, first you need to prepare cold porcelain. In an aluminum saucepan, mix starch and soda, then add a little dye to the water, let it completely dissolve, and only then pour the liquid into this saucepan and mix it well with the other ingredients.

You need to cook the porcelain over low heat, stirring constantly, for about 3 minutes, but you need to watch the consistency, the mixture should be thick and barely pull away from the walls of the pan. After the porcelain is ready, it needs to be allowed to cool.

To make roses, you need to tear off a small piece of porcelain and spread it over your palm. In essence, it resembles modeling from plasticine.

Carefully attach the first petal to a toothpick held in a vertical position.

So, one at a time, fasten until a small rose comes out.

You can choose its size yourself. Not all roses will have the same number of petals - that's okay, as long as they are at least approximately the same size.

The composition requires a minimum of 7 pieces. In any case, it is better to make 2-3 spare pieces. Flowers must dry within 3 days. You can't put them in the sun. When they are completely hardened, be sure to coat them with varnish (it is better to use varnish in a can). During these 3 days you will be able to choose 7 of the most beautiful roses, besides, if the lower petals are unsuccessfully fixed, during this time they may simply fall off.

Now you can start decorating. To do this, you need to cut the organza into small squares, approximately 5x5 cm. They do not have to be even, because small corners will only decorate the composition.

They need to be bent diagonally, then in half, so that a small triangle comes out. Now it should be secured to a toothpick, and secured from below with wire.

You will need about 10 such triangles. In the same way, you need to make 7 triangles, only the organza should be fixed in the middle of the toothpick so that a white bead can be glued to its tip with silicone glue. You need 7 such triangles.

DIY cold porcelain crafts

Cold porcelain- This is a very pliable material, so even very small products can be sculpted from it. Of course, other materials may be suitable for modeling, for example, salt dough or polymer clay, however, they subsequently need to be baked, and porcelain hardens in the fresh air after 2 days. It is convenient to work with, which is why needlewomen love this material. You can see the recipe for cold porcelain on our website, and in this article we will tell you how to make a spring bouquet of flowers.

Materials for making flowers:

- plastic spoons;
- cold porcelain of several colors;
- cookie cutter;
- cutting board;
- wire;
- knife;
- rolling pin;
- green electrical tape;
- plastic grass;
- basket for a bouquet.

DIY cold porcelain crafts

1. To create a beautiful flower bouquet you will need cold porcelain of different colors or you can use a plain paste.
2. Roll out the porcelain the same way as dough. We cut out the petals with an iron mold. You can make it yourself from a beer can or use a cookie cutter.

3. If you are working on a glass cutting board, press each petal firmly onto it to get a nice texture. You can also press it against another corrugated surface.
4. To ensure that the petals are curved, place them on disposable plastic spoons.
5. Wrap the wire with green electrical tape - these are our stems.

6. Take yellow or orange porcelain. Also roll out and cut into small triangles.
7. Finely cut the base of the triangle, roll the triangles into tubes and you will get beautiful pistils.

8. You also need to sculpt the stamens from yellow porcelain. Additionally, coat them with PVA and dip them in fine corn grits to create a pollen effect.

10. 6 petals are glued to the stem in two rows.

11. Cover the stem with green porcelain and hang the flowers so that they dry and do not change shape.
12. The finished flowers are placed in a basket, or simply collected into a bouquet and tied with a ribbon.

From cold porcelain You can make not only crocuses, but also tulips, roses, lilies of the valley and other flowers. It is not necessary to paint the porcelain while preparing the mass; you can then coat the finished products with oil paints. It’s easy to care for porcelain flowers; just blow on them with a hairdryer to remove the dust.

Watch the video on the topic: DIY cold porcelain flowers

Porcelain crafts do not lose their shape or crack over time, so they can become a beautiful interior decoration or durable.