home Service

Leaf crocheted pattern. Crochet leaves: all video tutorials

01.07.2023

The use of flowers and leaves for decoration by humans has been going on since the beginning of the world. In those ancient times, plants were depicted on temples and palaces; certain types of flowers and leaves were used by shamans and priests of various cults. Plants were symbols of many ancient gods. Certain types of flowers and foliage were given powers to bring good luck, victory in battle, profit, and even love. With the advent of needlework, their images were embroidered or knitted on clothes or furnishings and were convinced of their miraculous power. Some beliefs about their magical properties have survived to this day, for example, the belief that the clover shamrock brings good luck.

Nowadays, needlewomen crochet leaves as decorative elements or components of a dress, shawl or other things. Openwork and dense products created with your own hands show the whole world a miracle of craftsmanship and beauty.

Clover shamrock.

A very simple pattern will be clear even to beginners, and the elegant shamrock can be used as an element of Irish lace or to create a composition of voluminous flowers.

  1. Knit a chain of 4 chains. loops
  2. 1 air lifting loop, 1 tbsp. without crochet, 1 tbsp. with a double crochet, knit 10 tbsp into the outer loop of the chain. with 2 yarn overs.
  3. Knit 2 more such leaf parts.
  4. Knit a chain of 8 air. loops
  5. 1 air lifting loop, knit 7 tbsp. without a crochet, tie all 3 leaves into the last loop of the chain with connecting posts.

Small leaf.


When knitting this leaf, embossed stitches with 2 crochets are used.

  1. Knit a chain of 13 chain stitches. loops
  2. 1 air lifting loop, 7 tbsp. without double crochet (6 chain stitches remain unknitted). Knit from the last st. single crochet chain of 6 chains. loops
  3. In one loop of the row below, knit 3 air. lifting loops + 2 tbsp. double crochet, 2 tbsp. double crochet, 3 tbsp. double crochet, 1 tbsp. with 2 double crochets in the seventh st. without crochet, 3 tbsp. double crochet, 2 tbsp. double crochet, 3 tbsp. double crochet with one base.
  4. Knit 3 air into one loop. lifting loops + 2 tbsp. double crochet, 2 tbsp. double crochet, 3 tbsp. double crochet, 1 double crochet, 3 tbsp. double crochet, 2 tbsp. double crochet, 3 tbsp. double crochet with one base.
  5. 3 air lifting loops, 2 tbsp. double crochet, 3 tbsp. double crochet, 1 double crochet, 3 tbsp. double crochet, 3 tbsp. double crochet
  6. 3 air lifting loops, 3 tbsp. double crochet, 1 double crochet, 3 tbsp. double crochet, 1 tbsp. double crochet
  7. Knit with one top (3 chain stitches, 1 double crochet, 1 double crochet, 2 double crochets).

Relief columns are convex and concave.

Convex relief column. Make the required number of yarn overs, then insert the hook not into the loop, but from right to left into the column of the row below so that the “body” of the column of the bottom row is in front of the hook, pull out 1 loop and then knit as a regular double crochet.

Concave column. Knit like the convex one, but the “body” of the column of the bottom row should be behind the hook.

Chestnut leaf.


Starting from the 5th row of the middle, each petal is knitted separately. The length of the leaves varies due to the number of loops in the chain. For example, the smallest leaf is considered. Initially, a chain of v.p. is typed. for the petiole and center. Next, the middle is knitted in the round in rows back and forth.

Middle.

  1. Knit a chain of 28 chain stitches. loops
  2. Close a chain of 4 chains in a ring. loops
  3. First row. Knit 7 tbsp into the ring. without crochet + 2 air. loops (beginning and end of the row). Complete the row with a connecting column.
  4. Second row. 1 air lifting loop, 13 st. without crochet, 1 air. a loop. Finish with a connecting post into the lifting loop.
  5. Knit the third row in the same way, 20 tbsp. without crochet + 2 air. loops.
  6. Fourth row. similarly, 24 tbsp. without crochet + 2 air. loops.
  7. Fifth row. 32 art. without crochet + 2 air. loops.

Knit the remaining air. loops in 2 rows st. without a crochet, each time tying it to the middle with a connecting post.

Leaf. Bottom right.

  1. Knit a chain of 13 air. loops and knit st. single crochet, tie with a connecting stitch into the 3rd loop of the middle from the first row of the petiole.
  2. Knit a connecting stitch into the next center loop (instead of 1 lifting loop), knit into a chain of air. loops 2 tbsp. single crochet, 2 double crochets, 2 tbsp. double crochet, 2 tbsp. with 2 double crochets, 2 tbsp. with 3 double crochets, 2 tbsp. with 4 double crochets, in the last air. chain loop and st. Single crochet, knit 15 tbsp. with 4 yarn overs.
  3. Knit the second side of the leaf symmetrically. Last st. Secure without a crochet with a connecting post with a center.
  4. Skip 1 tbsp. without crochet, 3 tbsp. single crochet, *picot, 2 tbsp. without a crochet*, repeat from * to * 10 more times, 8 tbsp. without a crochet.
  5. By analogy, tie the remaining leaves.

Beautiful maple leaf.



This motif, knitted from fine yarn, will be an excellent element of a dress; it can be used as part of a shawl or tablecloth. If you knit such a maple leaf from thick threads and attach it to fabric, it will become an excellent stand for hot food, and the various shades of yarn will allow you to choose a color that matches the interior of the kitchen or dining room, and make the room even more cozy.

  1. Close a chain of 10 air into a ring. loops
  2. First row. Knit a fragment into each loop (2 tbsp with 2 yarn overs + 3 chain stitches), replacing 1 tbsp in the first case. with 2 yarn overs for 4 air. lifting loops.
  3. Second r. In each fragment of the previous row, knit (3 double crochets + 3 double crochets + 3 double crochets), replacing 1 double crochet in the first case. double crochet lifting loops. There are 10 fragments in total.
  4. Starting from the 3rd row, the fabric is divided. Knit into 9 fragments (4 double crochets + 3 double crochets + 4 double crochets), in the first case replacing 1 double crochet. double crochet with 3 lifting stitches, finish row 1 tbsp. double crochet Turn the work around.
  5. Fourth r. 3 air lifting loops, knit into each of 9 fragments (5 double crochet stitches + 3 double crochet stitches + 5 double crochet stitches).
  6. Fifth r. 1 air lifting loop 11 st. single crochet (all loops knitted into 1 fragment of the previous row), knit into each of the remaining 7 fragments (6 double crochet stitches + 3 chain stitches + 6 double crochet stitches), replacing in the first case 1 tbsp. double crochet lifting loops.
  7. Sixth r. start 3 air. lifting loops. Knit 7 fragments (7 double crochet stitches + 3 chain stitches + 7 double crochet stitches). Finish row 2 tbsp. double crochet knitted with one top.
  8. Seventh row. Start with 1 lifting loop and st. single crochet in all loops of one fragment of the previous row, 3 air. lifting loops, knit 5 fragments (8 double crochet stitches + 3 double crochet stitches + 8 double crochet stitches). Finish row 2 tbsp. double crochet knitted with one top.
  9. Eighth row 5 fragments (9 double crochet stitches + 3 chain stitches + 9 double crochet stitches), replacing 1 double crochet stitch in the first case. double crochet lifting loops.
  10. Ninth row. 3 fragments and 10 tbsp. double crochet
  11. Tenth row. 3 fragments and 11 tbsp. with a double crochet, replacing in the first case 1 tbsp. double crochet lifting loops.
  12. Eleventh row. 2 fragments and 12 tbsp. double crochet
  13. Twelfth row. 1 fragment, start 3 air. lifting loops, 13 tbsp. with double crochets + 3 air. loops + 13 tbsp. with double crochets.

Maple leaf using the original continuous knitting technique.



You can use it as a component of Irish lace or attach it to a fillet mesh to create a shawl. Perfect for decorating a bag.

In the diagram, a black dot marks the beginning of work.

  1. Dial a chain of 15 air. loops
  2. First row. 1 air lifting loop. Knit 13 tbsp. single crochet, glad to knit in the last loop (1 tbsp. single crochet + 4 chain stitches + 1 tbsp. single crochet), knit 13 tbsp. Yarn over from the reverse side of the initial chain.
  3. Second row. 1 air lifting loop, 13 st. without a crochet, in an air arch. knit loops (2 tbsp. double crochet + 4 chain stitches + 2 tbsp. single crochet), 11 tbsp. without a crochet.
  4. Knit 8 rows of the central part of the leaf according to the pattern.
  5. Ninth row. Start as usual with 1 air. with a lifting loop, knitting the indicated number of stitches according to the pattern. without a crochet, at the end of the row knit 4 air. loops.
  6. Tenth row. Knitting begins on one of the lateral left parts of the sheet. 1 air lifting loop, 8 tbsp. without crochet, 1 air. loop over st. single crochet row below, 1 tbsp. without a crochet.
  7. Eleventh row. 1 air lifting loop, 10 tbsp. without crochet, 4 air. loops.
  8. Twelfth row. 1 air lifting loop, 14 st. without crochet, 1 air. loop over st. without crochet, 1 tbsp. single crochet in st. Single crochet row 9.
  9. Knit further according to the pattern, securing the even rows of st. single crochet to st. Single crochet row 9.
  10. Knit the second left side of the leaf in the same way, without tearing off the thread, continue knitting st. single crochet to the end of the 9th row (right), knit 4 air. loops.
  11. Next row start 1 air. lifting loop and start knitting the two right parts of the leaf in the same way as the left ones.

A few more crochet leaf patterns.

The original leaf is knitted on a caterpillar cord.

It's no secret that leaves are different. For each specific case when a flower is created, a special leaf is useful. Crocheting them is easy. The main thing is to know the circuit diagram.

Classic oval leaf

First, cast on a chain of so many loops that it is equal to the final length. A leaf will be crocheted on it. As an example, let the number of loops be 13. An odd number is recommended due to the symmetry of the pattern.

Next, on both sides of this chain you need to knit a leaf (with a hook). The circuit is symmetrical relative to the middle of the chain. In the second and third loops, make a connecting post. The fourth loop requires a single crochet. In the fifth and sixth, one each will be placed. The next loop becomes the base. In the eighth loop (the middle of the chain), knit two stitches with three crochets. Then the columns appear in a mirror order with their length decreasing.

At the edge, tie and move to the other side of the chain. Make a drawing symmetrical to the first half of the sheet.

Now all that remains is to make a vein in the center so that the leaf (crocheted) looks more like a real one. It is made with simple connecting posts and picking up the thread from under the product.

Shamrock

You need to start knitting such a leaf (crocheted) with a chain of 12 air loops, which must be closed in a ring. In the first row, make the following stitches: 2 single crochets, 2 double crochets, 4 double crochets, 2 double crochets again and 2 more single crochets. Close the circle.

Second row: make two double crochets at each top. Close the circle and start knitting the second petal in the same way. Then the third.

Insert the hook into the bases of all three petals and pull the thread through them. Cast on 15 loops on which to tie connecting posts.

Leaf-foot

The technology of how to crochet a leaf may be slightly different. Moreover, this is often found in knitted items for decoration.

Start with a chain of 11 stitches. Tie connecting posts along its entire length. Perform a lift of 3 loops. Make a row of connecting stitches again, leaving two stitches of the previous row unknitted. Turn the work around.

An air loop and connecting posts to the end of the row, and the latter must be made into an arch of air loops. Three air loops and one more connecting one in the same arch. Make connecting stitches along the other side of the leaf, again without tying two at the end of the row. The starting chain should be in the center and be the longest.

Continue knitting in the same way until the required sheet size is obtained. There should be at least three such roundings. Otherwise the leaf will be too small.

Shamrock made of hearts

Cast on a chain of air loops, the length of which will be approximately 3 cm. You need to tie connecting posts on it. This will be the leaf cutting. Three hearts will be placed on it.

All work will be done on the front side. The hearts will form a pattern (crocheted), the leaves will be directed from the middle outward from the central circle. It must be made of 9 loops. Then tie it with connecting posts.

Cast on 8 loops from the circle and knit connecting stitches on them. The next row will produce the first half of one petal. It consists of: 1 connecting stitch, 1 single crochet, 1 half double crochet, 1 double crochet, 1 double crochet, in the last loop of the chain knit a fan of three double crochets, 4 chain stitches and a connecting stitch in the loop from which knitted fan. Then repeat everything in reverse order to get the second half of the petal.

Knit the other two petals in the same way. They must be connected to each other by half-columns.

Rowan leaf

It consists of nine identical petals to create a cute and symmetrical leaf (crocheted). The pattern of each petal is formed from the following elements: connecting, single crochet, double crochet, double crochet, double crochet again, one more single crochet and connecting.

You need to start knitting with a chain of 12 loops. On the last 8, perform a petal, leaving one of the cast-on loops for lifting. Cast on 12 more stitches. Tie another petal on them. Repeat this two more times. It turned out four petals on the right side.

For the central petal you will only need to cast on 8 stitches. Do the same with the 6th petal of the leaf. After this, tie three connecting posts on a chain of air loops. Cast on 8 loops and knit a petal. Repeat two more times.

The second, third, seventh and eighth petals can be made one loop longer and an additional double crochet stitch can be knitted in the middle. This way the leaf will turn out to be closer to what is in nature.

Conclusion

To make the leaves light and airy, the yarn must be thin enough. In this case, it is better to take the smallest possible size hook. And then the decoration of flowers and leaves will be elegant and spectacular.


































Knitted clover leaf

Knitted oak leaf

For example, how you can use knitted leaves in a composition:

Knitted maple leaves

Maple leaves can be used to decorate dresses, skirts, or knit a stole from them.




Crochet has always been in demand, but to varying degrees. Today this type of needlework is more popular than ever. Classic types of knitting are integrated: the fillet knitting pattern becomes the border of a summer jacket; elements of guipure tablecloths - a lush decor of blouses. The brims of hats are knitted with napkin patterns, and the yokes of jackets are knitted with collar motifs. There are many examples. This is a natural process, a kind of creative game. The value lies in the preservation of traditions and their modern embodiment.

Have you noticed, dear craftswomen, that the emphasis in knitting is on complex options that cannot be reproduced on a knitting machine? One of these trends is guipure. It is designed as an imitation of intricate and expensive Venetian embroidery.


The best examples of such crocheted lace were produced by Irish nuns, so over time it began to be called “monastic”, and later - Irish guipure. Please do not confuse it with Irish lace, which differs from guipure in its method of execution. Classic guipure knitting is complex and painstaking. Since it imitated lace embroidered with a needle, they used lace linen, thin cream or white paper threads for knitting elements and very thin ones for nets and brids. Modern fashion takes into account our busyness, the fast pace of life, and the desire to quickly realize a planned product. She favors large-knit models made from thick yarn. This is beneficial for beginning craftswomen. You may have noticed that the mesh holding the elements together is rarely used. “Adhesive” guipure fabrics are relevant. The elements have become larger, the thread is thicker.


So, let’s assume you are planning to knit a blouse entirely or a fragment of it with guipure elements. It is advisable to first draw a sketch on the pattern; you can improvise as you knit. The majority of the composition is occupied by leaves. There are many patterns for knitting leaves in various books and magazines. It is impossible to discuss their diversity within the scope of this article.


For example, it is customary to knit a classic guipure sheet in two ways: with an extension from one sc (pattern 1) and with an extension on the arch (pattern 2). In this case, the knitting methods can be different: for both half-loops, for the back half-loop, for the front half-loop, for the purl horizontal half-loop of the columns of the previous row.


The texture of the sheet in the first photo turned out to be flat, in the second - ribbed.


























Photo1. The sheet is crocheted according to pattern 1 using both half loops:

Photo 2. The sheet is crocheted according to pattern 1 using the back half-loop:

Photo 3. Complex sheet.

Crochet pattern for leaves 1 and 2:

Photo 4. Sheet 1 is crocheted according to pattern 2.

Pattern 3. Crochet a leaf.

Pattern 4. Crochet a leaf.


The shape of the leaf, knitted according to scheme 1, is wide at the cutting and sharp at the end. The increments on the arch according to scheme 2 create a sharper leaf shape on the cutting. With a large number of chain stitches (10-12) and the generally accepted indentation of 2 single crochets, the sheet turns out to be wide. The leaf denticles are concentrated on the front part; the stem has a smooth leaf. This form is good when combining them into a complex sheet (photo 3). With a small number of air loops in the initial chain (4-6), the sheet turns out to be narrow and, when knitting in multiple rows, long. The cloves are located along the entire length of the leaf (sheet 2 in photo 4).

What if the composition requires a large sheet with teeth along its entire length? Increase the number of single crochet stitches (diagram 3).

For clear, ornamental compositions, one or two types of leaves are used. In the sketch, leaves of different sizes and shapes are drawn: small and large, smooth and curved. The rotation of the sheet is obtained by knitting different numbers of sc on the left and right sides of the arch: 1 and 2, 2 and 3 give a slight turn of the sheet, and 1 and 3 - a steeper one. Sheet 4 in photo 4 is associated with a rotation in one direction (diagram 4). Such a variety of shapes and sizes of leaves only decorate the composition.


To be continued …





Let's continue the conversation about knitted leaves.


Diagram 5 shows a sheet in which the turns are connected alternately in different directions. A variety of leaf shapes decorates the composition and gives it expressiveness. Experiment too. How else can you get curved leaves? In addition to toothed leaves, there are rounded and arbitrary leaf shapes. Often found in compositions are small leaves connected by columns of different sizes. To add rigidity and beauty, tie them with single crochets with a “picot” or “crawfish step” (see diagram 6 and 7).

Tip: do not knit more than 2-3 half-stitches in a row. Their function is to create a smooth transition from single crochets to double crochets.


By analogy with knitting small leaves, it seems logical to knit medium-sized leaves in double and triple crochet stitches. Yes, this is possible, but the sheet, even after tying, turns out to be somewhat loose. Medium-sized leaves will look better if you knit them with single crochets, half crochets and single crochets on both sides of the VP chain (Diagram 8). Tie such a sheet with single crochets twice at the same column heads. Of course, add a single crochet on the rounded areas of the sheet. For the cutting, knit 6-7 chain stitches and tie single crochets on them in the opposite direction.



Another leaf option: knit stitches of different sizes on single crochets, with which you tie a chain of air loops on both sides (diagram 9).


Tie this sheet with a bourdon: fold the knitting thread in half (this is a bourdon), fasten single crochets in the middle of the bourdon, fold the bourdon threads together. Then hold the thread along the fabric and tie it with single crochets. Having tied the leaf completely, tie 6-7 sc around the thread (on the bourdon) for the leaf stalk. Knit the VP, tear off the bourdon unevenly, attach the rest to the knitting and knit the sc in the opposite direction. Lastly, tie the connecting posts at the base of the sheet, break the thread and pull it to the wrong side. Use the tail of the thread to sew the elements together.


If you are planning a fabric made of openwork, transparent elements, then the method of knitting the leaves changes. The diagrams show options for such leaves: small (diagram 10) and medium (diagram 11). Tying two rows of sc will give shape.



Two more options for openwork leaves are presented in Diagram 12.


To be continued …


The article was prepared based on publications from Fashion Magazine.






































































Model 2: another flower from a Japanese magazine. You can use it to make a wonderful brooch.
Model 3.Flower: knit a chain of 6 vp. and conclude its 1 connection. Art. in a circle Knit according to the pattern in circular rows, replacing the first loop of each circular row with a chain stitch of the beginning, the number of which is indicated in the pattern. And finish 1 connection. Art. in the last v.p. started.
Model 4. This flower is from a foreign magazine. I translated according to the meaning.
Model 5. Relief rose. Motive to knit according to the pattern. Start from point A 9 ch and close these loops into a connecting ring. Art. In the first row of Art. b/n knit around v.p. In the next row, knit loops under both threads and around the lower chs. In the 4th and 6th rows we knit s/n stitches by introducing a hook from the wrong side of the motif from right to left around the st. b/n or art. s/n of the penultimate row.
Model 6.Flower: knit a chain of 5 chains. and concluding it with 1 connection art. 6/n into the ring.

1st round row: 1 ch. beginning *3 v.p. 1 tbsp. b/n in the ring, repeat from * 2 times, 3 air. p., 1 connection Art. in air p. beginning.

2nd circular p.: 1 air. p. beginning, * 1 tbsp. 6/n into the air arch. p of the previous circular row, 4 tbsp. s/n. 1 tbsp. 6/n, repeat from * 3 times. 1 connection Art. in air n. beginning.

3rd circular route: 2 air. p., perform between the 2nd and 3rd art. s/n 1 tbsp. b/n in the arch made of air. n. 1st circular r., 5 air. n., repeat from * Zraz, 1 connection. Art. in the 1st art. 6/n.

4th circular route: 1 air. p. beginning, * 1 tbsp. 6/n into the air arch. p., 8 tbsp. s/n, 1 tbsp. 6/n, repeat from *Zraz. 1 connection Art. in the air beginning

5th circular p.: 1 air. n. beginning. * 4 air p. perform between the 4th and 5th art. s/n 1 tbsp. 6/n into the air arch. n. 3rd circular r., 4 air. p., 1 tbsp. 6/n in the next st. 6/n 3rd circular r. Repeat from * 3 times, ending with 1 connection. st b/n in v.p. started.

*1 tbsp b/n, 6 tbsp s/n, 1 tbsp. b/n in the arch from v.p. previous row, repeat from * 7 times, finish 1 connection. st instead of st. b/n in air n. beginning.

Model 7 without description, only diagram.
Model 8 without description.
Model 9. Double-layer flower.
Model 10.
Model 11.
Model 12.
Model 13Description: use 2-ply purple yarn to knit a flower according to pattern A and 2-ply blue yarn to knit a flower according to pattern B. Place the flowers on top of each other. Sew 3 beads in the middle.

VN:F









The article about knitted flowers turned out to be quite popular. Therefore, we continue to publish a collection of knitted flowers.

Pansies:

We knit the first flower according to pattern 1. Cast on 6 chain loops with eggplant-colored yarn, close them in a ring. Knit the 1st and 2nd row according to pattern 1. Knit the 3rd row in orange.


Knit the second flower according to pattern 2. Cast on 6 air loops and close them in a ring. Using orange yarn, knit from 1st to 4th row in pattern 2.


Bud: cast on 6 air loops from eggplant-colored yarn, close them into a ring. Knit rows 1-4 according to pattern 3.


Assembly:


Starch the flowers and bud, place the second flower on the first, place on a plastic stem and secure with stamens. Place the buds on plastic stems.






































































Knitting pattern for trefoil - brooches
The following flowers are very easy to connect together









We continue to publish a collection of knitted flowers.

Knitted daisies.


The core and petals of the flower are knitted with contrasting threads.


We knit a small flower:


cast on 5 air loops and close them in a circle with a half-column.

1st row: one air loop for lifting, 12 single crochets.

2nd row: *7 chain stitches, in the second loop we knit a single crochet and then 6 single crochets, we knit the 6th stitch in the second circular stitch*; repeat from * to * 5 more times (you will get 6 petals in total).

Row 3: tie all the petals according to pattern 1.


Core of a small flower:


cast on 2 chain stitches.

1st row: 5 single crochets in the 2nd chain stitch

Row 2: We knit 10 single crochets behind the back wall of the loop of the previous row.

Row 3: increase through 1 stitch = 15 stitches.


For a small flower you need to finish knitting and break the thread. For a large flower we knit the 4th row: we make increases through 1 loop = 22 loops.


We knit a large flower according to pattern 2.














































Knitting pattern for daffodils:

Knitted leaves can be used to decorate many products: clothes, hats, handbags. They can be used to decorate the interior - in the form of knitted plants in pots or in wall panels. You can crochet or knit leaves in different ways; this article discusses several typical motifs.

Clover Leaf

We start with a chain of 4 VPs. Next, knit 1 VP rise, 1 single crochet, 1 double crochet, in the last stitch of the chain knit 10 double crochets. The result is a petal. Knit two more petals in the same way. Then, without breaking the thread, knit a chain of 8 VPs. Next, the scheme is as follows: 1 air. p. lifting, 7 columns b/n, last. We attach the chains to the connection. stem all three parts of the leaf.

Oval leaf

Knit the original chain of 13 VPs. Further knitting pattern: 1 VP rise, 7 RLS. The remaining 6 VPs remain unknitted. From the last sc we knit a chain of 6 ch. In 1 point of the lower river. connect 3 VP lifts plus 2 dc, 2 dc, 3 dc with one vertex, 1 dc2n in the 7th dc, 3 dc with one vertex, 2 dc, 3 dc with one base.

In one stitch we knit 3 VP rises plus 2 StlbSN, 2 StlbSN, 3 StlbSN with one vertex, 1 concave StlbS2N, 3 StlbSN with one vertex, 2 StlbSN, 3 StlbSN with one base.

We knit with a common top: 3 VP rise, 1 StlbSN, 1 convex stitch with 2 nak., 2 StlbSN.

Knitting a voluminous leaf: video master class

Technique for making convex and concave relief columns

Convex

We make the required number of yarn overs, then insert the hook not into the loop, but from right to left into the post of the lower row. so that the pillar of the lower river. found himself in front of the hook, pull out 1p. and then we knit like a regular StlbSN.

Concave

Knit in the same way, but the stitch of the lower r. should be behind the hook.

Chestnut leaf

We start with the middle pattern, then knit the leaf elements one by one. The description describes the pattern of the smallest element. Knit the rest in the same way, adjusting the length by the number of stitches in the chain.

The first stage of knitting is to set a VP chain for the tail and middle. Next, the middle is knitted in circular rows.

Description

Middle

We collect a chain of 28 VPs. We close a chain of 4 VPs into a ring. Further knitting of the pattern:

  • 1st row: 1 VP, 7 RLS, 1 VP. We finish the series SS;
  • 2p.: 1 VP lifting, 13 RLS, 1 VP, SS in the lifting loop;
  • 3p.: 1 VP, 20СБН, 1 VP;
  • 4p.: 1 VP, 24 RLS, 1 VP;
  • 5p.: 1 VP, 32 RLS, 1 VP.

Tail

We knit the remaining VPs with two rows. Stlb b/n, each attaching to the middle of the SS.

The smallest – bottom right – element of the leaflet

We make a chain of 13 VPs, knit a sc, attach a connection. dc in 3 stitches in the middle from 1p. ponytail We knit a SS in the next one. p. middle instead of 1 VP rise, then - in a chain of VP - 2 stb without / n, 2 half-column. s/n, 2 StSN, 2 columns. with 2n., 2 columns. from 3n., 2nd column from 4n., in the outermost VP and RLS we knit 15 StS4N.

Knit the second half of the element in a mirror manner. We attach the last column b/n to the middle.
We skip 1 sc, 3 sc, *pico, 2 sc* - between *-* we repeat 10 times, 8 sc.

Tie the remaining elements of the chestnut leaf using the same principle.

Maple Leaf

Knit a chain of 10 VPs and close them into a ring. Further knitting of the pattern:

  • 1st row: in each stitch, knit a fragment, replacing the first stitch with 2n at the beginning. for 4 VP lift;
  • 2p.: in each of the fragments of the previous one. R. tie, replacing the first StS3N with 3 VP lifts at the beginning. Total – 10 fragments.
  • starting from 3rd p.m. the work is divided. Knit in 9 fragments, at the beginning replacing 1 DC with 3 VP lifts. We complete the r. 1 double crochet. We unfold the work;
  • 4p.: 3VP lifting, knit into each of 9 fragments;
  • 5 rubles: 1 air. p. lifting, 11 stbn, in each of the remaining 7 fragments, knit, replacing the first stsn with 3 VP lifting at the beginning;
  • 6p.: 3 VP lifting, knit 7 fragments. Complete r. 2 dc, knitted with a common top;
  • 7p.: 1 VP lifting, sc in all points of one fragment before. r., 3 air. p. under., tie 5 fragments Complete p. 2 dc, knitted with a common top;
  • 8p.: 5 fragments, replacing the first StSN at the beginning with 3 VP lifts;
  • 9p.: 3 fragms. and 10 StSN;
  • 10 rubles: 3 fragments. and 11 StSN, replacing the first StSN at the beginning with 3 VP lifts;
  • 11r.: 2 fragments. and 12 STSN;
  • 12r.: 1 fragment, start 3 VP under., 13 Stsn plus 3 air. p. plus 13 Stsn.

Continuous knitting maple leaf

In the image of the pattern diagram, a black dot marks the beginning of knitting.

  • 1st row: 1 VP under., 13 RLS, knit in the outermost point, 13 columns. with double crochet on the other side of the original chain;
  • 2p.: 1 VP under., 13 RLS, tie into an arch from VP, 11 columns. without/n.
  • knitting the next 8p. leaflet - see diagram. Let's continue:
  • 9 rubles: 1 air. p. under., then - RLS according to the scheme, we complete 4 VP;
  • 10 rubles: we begin knitting the side left part: 1 VP, 8 single stitches, 1 air. p. above the stlb without / n the lower r., 1 RLS;
  • 11r.: 1 VP under., 10 StBN, 4 VP;
  • 12r.: 1 VP under., 14 tbsp without/n, 1 air. p. above the stlb without / n the lower row, 1 sc in the sc of the 9th row.

Further knitting of the pattern - see diagram. We attach the even rows with columns without / n to the column without / n of the 9th row.

Without breaking the thread, we knit the second left side of the sheet in the same way, and continue knitting sc until the end of 9 p. on the right, 4 VP.

Next R. we start 1 VP under. and knit the two right parts of the sheet in a mirror image to the left.

Crochet oak leaf

  • 1st: in 2nd. from hook 4 Stbn, 4 half stitches. from 1n., 5 tbsp. from 1n., 2 StS2N, 8 StS2N to the outermost point. We turn the work around and knit in the opposite direction - 5 tbsp. with 2n., 5 tbsp. from 1n., 4 half-st. from 1n., 4 tbsp. without/n. semi-st. without n. to the outermost point;
  • 2p.: in the 1st column without n. knit 1 half st. from 1n., skip the next one. p., * 3 StS1N, 3 VP, 1 half st. without n.* – next. P. ;
  • 1 half tbsp. without n., 1 RLS, 1 P1N, 1 StS1N, *3 StS2N, 4 air. p., 1 half st. without n.* – next. P.;
  • 1 half tbsp. without n., 1 RLS, 1 P1N, 3 StS1N, *3 StS2N, 4 air. p., 1 half st. without n.* – next. P.;
  • 1 half tbsp. without n., 1 RLS, 1 P1N, 1 StS1N, *2 StS2N, 4 air. p., 1 half st. without n.* – next. P.;
  • 1 half tbsp. without n., *1 half-st. with 1n., 1 StS1N, 1 StS2N* - next. P.

The second side is done in the same way:

  • 1 tbsp. with 2n., 1 tbsp. with 1n., 1 p/st. from 1n.* – to the next. p., 1 p/st. b/n;
  • 1p/st b/n, 4 air. p., 2 StS2N * – next. p., 1 tbsp with 1n., 1 p/s with 1n., 1 st.b/n, 1 p/s b/n;
  • 1p/st b/n, 4 air. p., 3 StS2N * – next. p., 3 tbsp with 1n., 1 p/s with 1n., 1 tbsp. b/n, 1 p/s b/n;
  • 1p/st b/n, 4 air. n., 3 StS2N* – next. p., 1 tbsp with 1n., 1 p/s with 1n., 1 st.b/n, 1 p/s b/n;
  • 1 p/s b/n, 3 air. n., 3 StS1N* – in next. p., skip 1 p., 1 p/s from 1n., 1 p/s w/n in the last. p/s b/n 2nd r.

Stem: 5 VP, 1 st.b/n in 2p. from the hook, 3 p/s b/n, complete 1 p/s b/n to the outermost p/s b/n of the 2nd row.

We secure the end.

Knitted oak leaf

In the description, the leaf is knitted from three colors of yarn - it is autumn. If you wish, you can turn it into a spring one by knitting it entirely from green yarn.

We knit a cord 2.5 cm long using 3-point knitting needles. Further knitting is carried out on the same loops:

  • 1st row: cast on with knitting needles 5 stitches. cord set, 7l., 1i. We only have 8 p.;
  • 2 rub. (front side): cast on with knitting needles 5p., 6p., remove 1p. purl, 6l. We have 13p.

In all the following persons. R. The central loop should be removed as a purl stitch. We continue with knitting needles:

  • 3rd: persons;
  • 4p.: 6p., remove with knitting needles 1p., 6p.;
  • 5r.: like 3r.;
  • 6r.: like 4r.;
  • 7th: closed 2p., 11l. Total work 11p.
  • 8r.: closed 2p., 4l., remove 1p., 4l. Total 9p.

Next 2p. we knit with knitting needles, changing the number of loops. Let's continue:

  • 11p.: cast on with knitting needles 2p., 9l. Total 11p.;
  • 12p.: cast on with knitting needles 2p., 6l., remove 1p., 6l. We have 13p.

Next 2p. we knit with knitting needles without changing the number of stitches. In the second of these rows we move to the next color of yarn. We continue with knitting needles:

  • 15r.: close 3p., 10l. Only 10 p.;
  • 16r.: closed 3p., 3l., remove 1p., 3l. 7p left.
  • 19 rubles: dial 2p., 9l. Total 9 p.;
  • 20r.: dial 2p., 5l., remove 1p., 5l. Total 11p.

Next 2p. we knit with knitting needles without changing the number of loops. In the second of these rows we move to the next color of yarn. We continue with knitting needles:

  • 23r.: closed 3p., 8l. Total 8 p.;
  • 24 hours: closed 3p., 2l., remove 1p., 2l. Total 5p.
  • Next 2p. we knit with knitting needles without changing the number of loops. Then:
  • 27r.: x3, remove 1p., 2p. in 1l. Total 3p.

Close the remaining loops.

palmate leaf

First sheet

  • 1st: 1 tbsp. b/n in 2p., 1p/s with nak., 1 stsn, x3, 1 stsn, 1 p/s with nak., 1 stb b/n, ss, turn;
  • 2p.: 1 stb/n in each stb of the row, x11.

Without breaking the thread, we knit the 2nd sheet and all subsequent ones. The algorithm is the same, we look at the number of loops in the original chain from the image of the diagram.

Center

  • 1 tbsp in the last p. T. o. in it, a total of two stitches are knitted, x4, 16 VP, 1 st.b/n. in the 2nd stitch from the hook, x14 times, SS in the 1st stitch in the middle.

Diamond-shaped leaf

Decorative leaf

Melange yarn is used for knitting. We start with 17 VP. Further:

  • 1st row: 1 column without/n. in 3 sts from the hook, 1 stb without/n. in each point of the row, - to the outermost point, turn the work. On the second side of the original chain we knit 1 stitch without a thread, turn the knitting.

Track. R.: 4 VP, 1 RLS for the back wall in each stitch to the arch, in the arch, 1 RLS for the back wall in each stitch to the last 2 stitches, turn knitting.

Repeat the last row 7 times. Then we knit a SS in the center of the fabric to the arch 1p. We finish knitting.

And now we offer you several options for leaf patterns for interior compositions. These beautiful leaves are knitted according to the proposed patterns, the length is determined by the number of VPs in the original chain.